6 Pack PCI-E 16X to 1X GPU VER010S Plus Riser (Dual-6pin / MOLEX) with…

Price: $29.95
(as of Jan 18, 2025 02:43:52 UTC – Details)

The PCI-E X16 to PCI-E X1 riser cable is an adapter that allows for users to extend onboard PCI-E slots (both X16 and X1) and connect multiple PCI-E devices on a single motherboard at once. However, the tradeoff for being able to connect multiple devices is slower speeds if used to convert an X16 slot. These adapters are very commonly used for crypto currency mining to allow for the use of multiple graphics cards on the same motherboard.
A breakdown of what’s included:

• (1) PCI-E Riser Adapter Card with 8 solid capactors for improved stability.
• (1) 23.6-inch (roughly 60CM) shielded Male USB 3.0 to Male USB 3.0 Cable included is responsible for data transfer. It also is the prime component in the kit to enable the extension of the PCI-E slots.
• (1) 7.9-inch (roughly 20CM) Male PCI-E 6-pin to Male Sata Power Cable to allow end users to adapt the PCI-E power connection into a SATA connection. (Please note that this adapter should only be used for devices that have a power draw under 54W, we do not recommend using this to power a graphics card).
• (1) PCI-E X1 Adapter Chip has gold plating on the connector pins to promote a more stable connection.

THINGS TO NOTE:

1. If you are planning on powering graphics cards with these risers, please DO NOT use the included SATA to PCI-E adapter cable. This cable is only meant to be used on lower power PCI-E devices such as network cards. We would highly recommend using a PCI-E power cable to power the riser and or graphics ard instead.
2. Please make sure that the PCI-E X1 adapter is plugged into the motherboard slot correctly (the side with the hole should be hanging freely on the left hand side).

Our PCI-E X16 to X1 risers allows users to connect multiple PCI-E devices on a single motherboard. This allows users to maximize the amount of graphics cards or PCI-E devices that can be connected to a single motherboard for scenarios like ethereum mining or GPU crypto mining rigs.
Our product features a reinforced PCI-E slot for more durability and peace of mind. This will help protect the GPU or other PCI-E device’s connector from being damaged in the case of an accident such as a fall.
Our riser features 8 solid capacitors which allows for improved stability, leading to longer runtimes barring outside factors. This equates to less troubleshooting headaches and more uptime.
The USB 3.0 data cable allows for fast data transfer which can equate to higher hashrate output.
The PCI-E X1 chip’s gold plated connector pins promotes a more stable and high speed connection which can lead to higher hashrates and or higher data transfering speeds.
WARNING: Please DO NOT use the included PCI-E to SATA power cable if you are planning to use the risers to power a higher wattage device such as a Graphics card. These adapters are only intended to be used on lower powered PCI-E devices such as network cards or adapters.
PLEASE NOTE: The PCI-E X1 adapter should be inserted in the correct fashion (the hole hanging over the slot on the left hand side). We are NOT liable for any damage caused to customer’s hardware due to improper use/installation.